Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 45
Copying will erase whatever is in Emax’s memory. If that’s not okay, press NO, save what’s in
memory to another disk (PRESET MANAGEMENT 2), then try copying again. Otherwise, press YES
and the display will say:
Check that the source disk is in the drive and press ENTER. The display will ask you to wait Just a
Moment, then say...
3. Insert a formatted destination disk, then press ENTER. Wait “Just A Moment….”
4. After several seconds, the display asks:
If you want another copy, insert another previously formatted disk and press YES. Otherwise, press
NO to return to the Module Identifier.
Module: MASTER 7 Function: BIRD RUN
This function aligns Emax’s internal stabilizers and prevents excessive gyrocosmic relativation.
1. Activate MASTER 7.
2. Carefully observe the display for any signs of destabilization (eg. gravitational warps, apparent
speeding up or slowing down of time, objects in mirrors appearing closer than they really are). If
Emax returns to the Module Identifier after a few seconds, all is well.
Note: Occasionally a small emu will get trapped within the Emax and run across the screen during
the stabilization scan process. This does not affect Emax’s normal functions.
Module: MASTER 8 Function: SPECIAL
This module holds some seldom-used, but extremely useful, functions.
1. Activate MASTER 8. The display says:
2. Select the desired special function. More functions may be added in the future, but here is what is
currently available:
Please Insert
Source Disk
Please Insert
Destination Disk
Copy to Another
Disk? Y/N
Special (1-6) / Slider
To Next Page
Loading...