Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 81
If you choose Positional Crossfade, the display will say:
The selected Voice will become more prominent as you play higher on the keyboard, and the other
Voice will become less prominent.
After making your selection, press ENTER.
Module: PRESET DEFINITION 6 Function: ARPEGGIATOR SETUP
You’re going to love this arpeggiator: it does a lot and it’s easy to set up. Best of all, arpeggiation
settings are stored with the Preset so that different Presets can have totally different arpeggiation
characteristics. Also, arpeggiation can be assigned to any range of the keyboard or the entire
keyboard, and some arpeggiation parameters can be altered in real time for expressive
arpeggiation.
1. Select the Current Preset; this Preset will contain the arpeggiation information.
2. Activate PRESET DEFINITION 6. The display says:
Use the cursor keys to select the various Arpeggiator options or press ENTER to jump back to the
Module Identifier. The first arpeggiation option display says:
Select the desired arpeggiator status with the ON or OFF buttons. To jump back to the Module
Identifier press ENTER, otherwise press the right arrow cursor key to continue the setup.
3. The next display says:
Use the data slider or the numeric keypad to adjust the tempo through the range from 40 - 240 Beats
Per Minute. Press the right cursor key to to do fine adjustment to the tempo. Use the data slider or the
numeric keypad to adjust the tempo through the range from .00 - .99 Beats Per Minute.
If you have selected a clock other than the internal clock (see next menu item), the arpeggiator will
follow and display this clock rather than the internal clock.
4. The next menu item chooses the note value; the display says:
Use the data slider to select between the following arpeggiation note values: 1/2 note, 1/4 note, 1/4
triplet, 1/8, 1/8 triplet, 1/16 (default setting), 1/16 triplet, 1/32, 1/32 triplet, and (believe it or not) 1/96
note. The note value can be manipulated in real time. To jump back to the Module Identifier press
ENTER, otherwise press the right arrow cursor button to continue the setup.
Tempo: ♪= 120.00
[040-240] Inc/Dec
Arpeggiator: off
Select on/off
Arpeg Setup Menu
Use Cursor Ke
s
Pri or Sec Voice
On To
: Sec
Note Value: 1/16
Use Data Slider
To Next Page
Loading...