41
• Modifying an existing PIN code, while a former code already exists, is possible but only when is already running,
i.e. the PIN you want to change has already been entered at start-up. You must therefore click once on the lock icon (16)
and enter the current code once, then validate it (validation icon 14). The device is unlocked; the oblique red line appears
the lock icon (16). It is then possible to enter a new PIN code by following the same steps as those described previously.
• If you have mistakenly selected the lock icon (16), and that you do not wish to enter a personalised PIN code, click on the
go back icon (13).
IMPORTANT:
If you cannot remember the PIN code you have entered, you must send us back your
so that our technical depart-
ment can unlock your device. This service is not included in the warranty; you will therefore be billed for it.
• Beep keys
By default, the “Beep keys” are activated but it is possible to disable it. This is why we recommend that you choose a simple
PIN code that you can remember, but you will also need to write it down somewhere else.
OPTIONS
To Next Page
Loading...
General