ACCESSORIES
47
It is used to clean and maintain:
• the optical parts of the mobile head of the applicator:
- External optical parts: spray directly and wipe with a dry
cotton cloth.
- Internal optical parts: never spray directly on the inter-
nal optical parts. Take a dry cotton cloth and spray on
the cloth, and then clean the filter (flat red part made of
glass) with this dampened cloth. Finish cleaning with a
dry part of the cloth.
The spray must only be used once the device is unplugged and
the optical parts have cooled down.
If you intervene after using the , you must wait for the fan
of the applicator to come to a complete stop before unplugging the
base. This enables, among other things, the optical parts to cool
down properly.
• The device’s touchscreen: Never spray direct-
ly on the touchscreen. Take a dry cotton cloth
and spray on the cloth, and then wipe the screen
with this dampened cloth. Finish cleaning with a
dry part of the cloth.
Made in France
These self-adhesive are used to cover the small areas
that must not be flashed (e.g. moles). They must be placed after
shaving and before applying the gel. It is then possible to flash
any area without having to worry about moles. The patches will be
removed at the end of the session.
Made in France
These stencils are used to mark off the areas that must not be
flashed in order to keep hair in fun shapes in certain areas. They
must be placed after shaving completely and after applying the
. The presence of the gel maintains these stencils in place. It
is possible to flash in the middle between the edge of the stencil
and the skin so as to have a clear delineation of the contours of
the desired form.
Made in France
www.e-swin.com
(option)
To Next Page
Loading...