E.T. Systems UMPETHA - Learning Master Remote for BT Operation; Initial Gate Operation; Master Remote Button Press; New Transmitter Button Press

UMPETHA 082009/072010.014
22
Learning a remote transmitter button in the receiver for BT open/close operation: -
(25 user memory)
Action
Pictorial confirmation
Response
Press and hold the required remote
transmitter button
RX LED flickers lightly.
Short circuit the middle RX
programming pin to the BT pin.
(Furthest from the gate)
RX LED flashes
Confirmation.
1 flash = First transmitter learnt.
2 flashes = Successful there is still
memory available.
Multiple rapid flashes = memory full.
Remove the short circuit once the
RX LED flashes confirmation.
RX LED remains lit in standby.
Release remote transmitter button
Learning a remote transmitter button in the receiver for the pedestrian operation: -
(6 user memory)
Action
Pictorial confirmation
Response
Press and hold the required remote
transmitter button
RX LED flickers lightly.
Short circuit the middle RX
programming pin to the PED pin.
(Closest to the gate)
RX LED flashes
Confirmation.
1 flash = First transmitter learnt.
2 flashes = Successful there is still
memory available.
Multiple rapid flashes = memory full.
Remove the short circuit once the
RX LED flashes confirmation.
RX LED remains lit in standby.
Release remote transmitter button