E.T. Systems UMPETHA - Safety Beam Input Configuration; Programming Mode Activation; Setting Input Type; Exiting Configuration

UMPETHA 082009/072010.014
18
Changing crawl distance:-
Default: - 350mm
Action Response
2 beeps
Continuous beep
Continuous beep off
To change again without leav ing programming, repeat from point 2.
Remov e program jumper or continue to another programming option
1. Program jumper on
2. Dip-switch 4 on
3. Press and release Set button
Beeps confirm change
1 beep = 350mm
2 beeps = 700mm
4. Dip-switch 4 off