Need help?Do you have a question about the E.T. Systems UMPETHA and is the answer not in the manual?
General| Brand | E.T. Systems |
|---|---|
| Model | UMPETHA |
| Category | Garage Door Opener |
| Language | English |
Placing the magnetic actuator correctly on the rack for limit detection.
Fine-tuning the limit actuator for accurate stopping points.
Steps for positioning the gate and setting the program jumper.
Procedure for setting the closed and full open limit positions.
Procedure to reverse the gate's opening direction if necessary.
Activating the programming mode using the program jumper.
Configuring auto-close duration by counting beeps.
Steps to exit the auto-close time setting mode.
Setting the opening distance for pedestrian access.
Configuring the auto-close timer for pedestrian mode.
Confirming the desired crawl distance setting.
Steps to exit the crawl distance adjustment mode.
Entering the mode to configure safety beam input.
Selecting the safety beam input type (N/C or N/O).
Modifying the sensitivity of obstruction detection.
Procedure to test the configured obstruction sensing level.
Describes how the gate reacts to obstructions during operation.
To Next Page
