4810 Clover Road • Greensboro, NC 27450 • 1-800-336-2776 • www.eagleequip.com • © Eagle Equipment 2017.12 • page 9
1. PRODUCT DESCRIPTION
An imbalanced wheel will make the wheel jump and steering wheel wobble while driving. It can bafe
the driver to drive, aggrandize the cleft of combined area of steering system, damage the vibration
damper and steering parts, and increase a probability of the trafc accident. A balanced wheel will
avoid all these problems.
This equipment adopts the new LSI (Large Scale Integrated circuit) to constitute the hardware system
that acquires processes and calculates information at a high speed. Read the manual carefully before
operating the equipment to ensure normal and safe operation. Dismantling or replacing the parts of
equipment should be avoided. When it needs repairing, please contact Eagle Customer Service. Before
balancing, ensure the wheel xed on the ange tightly. Operator should wear close-tting smock to
prevent from hanging up. Do not use beyond the stated function range of manual.
2. SPECIFICATIONS
EB-1200
Max wheel weight 143 lbs.
Rim diameter 10"-24"(256mm-610mm)
Rim width 1.5"-20"(40mm-510mm)
Motor power 200W
Power supply 110V/50Hz
Rotating speed 200r/min
Cycle time 8 seconds
Noise <70dB
Net weight: 216 lbs.
Dimensions: 38"W x 46"H x 30"L
2.2 FEATURES
Adopt 9 LED display, it has exible indicator operating function.
Various balancing modes can carry out counterweights to stick, clamp, or hidden stick etc.
Input data of rim automatically by measure scale. Intelligent self-calibrating and measure scale self-
labeling function. Self fault diagnosis and protection function. Applicable for various rims of steel
structure and duralumin structure.
2.3 WORKING ENVIRONMENT
Temperature: 5~50˚C
Altitude: ≤4000m
Humidity: ≤85%
To Next Page
Loading...