73
Tip:
If you wish, you can change the displayed data font size when you
select a data type:
1. From the Sonar page, press
MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|press → or ← to select Data
Size|
ENT.
The data will be shown in the new font size. To return to the previ-
ous page, press
EXIT.
Sonar Page with Overlay Data turned on. This example shows Depth,
Water Temperature and Water Speed.
NOTE:
Some data types can be displayed in only one font size. If that is the
case, the Data Size box will not be displayed for that data type.
Ping Speed & HyperScroll
Ping Speed controls the rate at which the transmitter and transducer
broadcast sonar sound waves — pings — into the water. The unit has a
default ping speed of 50 percent. At normal boating speeds, this auto-
To Next Page
Loading...
