162
Edit Trail menu.
New Trail
To manually start a new trail in the Trails Menu make sure NEW TRAIL is
highlighted and press
ENT|EXIT.
Trail Visible/Invisible and Other Trail Options
The name, color, pattern, maximum number of trail points as well as
the active and visible settings all are changed on the Edit Trail menu
screen. The active setting determines whether or not the unit is
recording new points for a particular trail.
On the Edit Trail menu, press ↓ ↑ or ← → to highlight the section you
wish to change, then press
ENT. Make your changes, then press EXIT to
close this menu.
Units of Measure
This menu sets the speed and distance (statute or nautical miles,
meters), depth (feet, fathoms, or meters), temperature (degrees
Fahrenheit or Celsius) and heading (true or magnetic) units. change
the units:
Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|ENT.
To Next Page
Loading...
