69
you want to resize from the Overlay Data Shown menu and press
ENT.
Scroll down to the overlay size window and press
ENT to make the
desired changes.
3. To return to the previous page, press
EXIT|EXIT.
The overlay size command (left) and a sonar window (right) with
Depth, Temperature, Track and Ground Speed displayed onscreen as
overlay data.
NOTE:
Some data types can be displayed in only one font size. If that is the
case, the Data Size box will not be displayed for that data type.
Overlay Data Style
Do you like a digital readout or do you prefer an analog gauge look?
With the Overlay Style feature you can mix and match your data to suit
your viewing preferences.
To access overlaid data style menu:
1. Press MENU|↓ to OVERLAY DATA|ENT.
2. This will bring up the Overlay Data Shown menu with a list of
current overlay data. Highlight the data you want to change on the
Overlay Data Shown menu and press
ENT, which will launch the data
information menu.
3. Use ↓ to select overlay style, choose analog, and press
ENT.
4. Next, press
→ to enter Analog Setup, which will place a gauge on the
display instead of digital numbers
.
To Next Page
Loading...
Need help?
General
