To Next PageTo Next PageWhat to do if my easy Maxx JD3362 Power Tool won't turn on?
First, ensure the mains plug is correctly inserted in the socket and try another socket to rule out a defective socket. Check the fuse of your mains connection. If these steps don't work, the carbon brushes may be worn or other parts of the device may be defective, and you should have the device repaired in an authorised specialist workshop.
Why is my easy Maxx JD3362 Power Tool vibrating excessively?
Excessive vibration could be due to several reasons. The attachment might be loose, incorrectly fitted, bent, damaged, or unsuitable for the workpiece. Also, the speed might be set too high; try reducing it using the speed controller.
Why is my easy Maxx JD3362 operating slowly?
Your easy Maxx Power Tool might be operating slowly because the attachment is blunt or damaged; in this case, you should sharpen or replace it. Also, ensure the speed isn't set too low; increase it using the speed controller.
What to do if my easy Maxx JD3362 Power Tool is sparking?
Sparking in the motor unit may be due to worn carbon brushes, a short circuit or outage in the armature, or a contaminated commutator. In any of these cases, have the device maintained in an authorised specialist workshop.
General| Brand | easy Maxx |
|---|---|
| Model | JD3362 |
| Category | Power Tool |
| Language | English |
Covers article description, model, technical specifications, and EU regulations compliance.
Lists compliance standards and details related to the declaration's date, version, and issuer.
Defines the purpose and scope of the multi-tool's application.
Covers work area, electrical, personal safety, and tool care warnings for general power tools.
Addresses workplace, electrical, and personal safety specific to the multi-tool's operation.
Highlights potential risks that remain even when safety precautions are followed.
Provides a numbered list of all supplied parts and accessories with their descriptions.
Identifies and illustrates the main components and parts of the multi-tool.
Steps for unpacking, inspecting, and familiarizing with the device before first operation.
Detailed instructions for attaching various accessories like handles, cutters, and shafts.
Guidance on operating the multi-tool, including setting depth, speed, and handling different tasks.
Procedures for device inspection, cleaning, lubrication, and proper storage.
Lists key specifications, noise, and vibration information for the device.
Common problems, causes, and solutions for device malfunctions and operational issues.
Instructions for environmentally friendly disposal of packaging and the device itself.
