Eaton 93PM G2 - Page 66

5. Select Configuration and then Relays Outputs.
Figure 35. Selecting Relay Outputs in the Configurations screen
6. Select from these options:
• Native (Alarm) relay
It is possible to set 8 different events for the native relay. If any of the set events occurs, the
relay is activated
• MiniSlot 1
• MiniSlot 2
• MIniSlot3
• MiniSlot 4
Figure 36. Options for relay outputs configuration
7. Enter the code(s) of the function(s) that you want to trigger the relay when they become active.
EATON 93PM G2 UPS USER’S AND INSTALLATION GUIDE P-164000956
-
February 2021 www.eaton.eu 6666