Eaton 93PS - Page 85

6. Select out of the following options:
• Native (Alarm) relay
It is possible to set 8 different events for the native relay. If any of the set
events occurs, the relay is activated
• MiniSlot 1
• MiniSlot 2
Figure 35: Options for relay outputs configuration
7. Enter the code(s) of the function(s) that you want to trigger the relay when
they become active.
© Eaton Corporation plc 2020. All rights reserved. Revision: 006 Document ID: P-164000493 85 (126)
Eaton 91PS/93PS UPS 8–40 kW User’s and Installation Guide