Eaton 9PX2000RT-L - LCD Operation Status

Eaton 9PX Lithium-Ion User Guide P-164001006—Rev 02 7
22..55 LLCCDD DDeessccrriippttiioonn
Figure 3. LCD Description
Operation status
Load/equipment status
Online mode
100%
19min
1EBM
100%
2.4kW
3.0kVA
Efficiency: 94%
Battery status
Efciency and load group information
The following table describes the status information provided by the UPS
Note: If other indicator appears, see the troubleshooting for additional information.
Table 4. LCD Operating Status
Operation status Cause Description
Standby mode
The UPS is Off, waiting for startup
command from user.
Equipment is not powered until
button is pressed.
Online mode
The UPS is operating normally. The UPS is powering and protecting the
equipment.
Battery mode
A utility failure has occured and the UPS
is on Battery mode.
The UPS is powering the equipment with
the battery power. Prepare your
equipment for shutdown.
End of backup time
The UPS is on Battery mode and the
battery is running low.
Low Battery Warning settings:
[Capacity] [0%] ... [100%]
[Runtime] [0mn] ... [60mn]
The alarm triggers when the set
percentage of battery capacity or
remaining back-up time is reached.
LCD Description