Eaton 9PX2000RT-L - User Settings Configuration

Eaton 9PX Lithium-Ion User Guide P-164001006—Rev 02 9
Table 5. Display Functions (Continued)
Main menu Submenu Display information or Menu function
Fault log Fault list Displays the faults stored
Reset fault list Clears faults
Identification
[Product type/model] / [Part/Serial
number] / [UPS/NMC firmware] / [Com
card IPv4], [Com card IPv6], [Com card
MAC]
Registration Links to Eaton registration website
22..77 UUsseerr SSeettttiinnggss
The following table displays the options that can be changed by the user.
Table 6. User Settings
Submenu Available Settings Default settings
Local Settings
Language
[English] [Français] [Deutsch]
[Español] [Русский]
[Português] [Italiano]
[Simplified Chinese]
[Japanese] Menus, status,
notices and alarms, UPS fault,
Event Log data and settings
are in all supported
languages.
[English] User selectable
when UPS is powered for the
first time.
Date/ time
Format: [International] [US] [US]
LCD Modify LCD screen brightness
and contrast to be adapted to
room light conditions.
Audible alarm
Mode: [Enabled] [Disabled on
battery] [Always disabled]
Enable or disable the buzzer if
an alarm occurs. Level: [High]
[Low]
[Enabled] [High]
Protected access
[Enabled] [Disabled] Password
is: 0577
[Disabled]
In/Out settings
Output voltage 100V] [110V] [120V] [125V] [120V]
[200V] [208V] [220V] [230V]
[240V]
[208V]
Output frequency Mode: [Normal] [Converter]
[Marine] Frequency can be
changed in Frequency
[Converter] mode In [Marine]
mode output frequency
follows input frequency
[Normal]
User Settings