EasyManua.ls Logo

Eaton C440/XTOE - Environmental and EMC Specifications

Eaton C440/XTOE
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Data and Specifications
6 C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com
Electronic Overload Relays Up to 1500A—Ratings and Specifications, continued
Specification
Description 45 mm 55 mm
Short-Circuit Rating without Welding
Maximum fuse 6A gG/gL 6A gG/gL
Environmental Ratings
Ambient temperature (operating) –13° to 149°F (–25° to 65°C) –13° to 149°F (–25° to 65°C)
Ambient temperature (storage) –40° to 185°F (–40° to 85°C) –40° to 185°F (–40° to 85°C)
Operating humidity UL 991 (H3) 5% to 95% non-condensing 5% to 95% non-condensing
Altitude (no derating) NEMA ICS1 2000m 2000m
Shock (IEC 600068-2-27) 15g any direction 15g any direction
Vibration (IEC 60068-2-6) 3g any direction 3g any direction
Pollution degree per IEC 60947-4-1 3 for product (2 for pcb) 3 for product (2 for pcb)
Ingress protection IP20 IP20
Protection against direct contact when actuated
from front (IEC 536)
Finger- and back-of-hand proof Finger- and back-of-hand proof
Mounting position Any Any
Climatic proofing Damp heat, constant to IEC 60068-2-30 Damp heat, constant to IEC 60068-2-30
Electrical/EMC
Radiated emissions
IEC 60947-4-1-Table 15
EN 55011 (CISPIR 11) Group 1, Class A, ISM
30 MHz to 1000 MHz 30 MHz to 1000 MHz
Conducted emissions
IEC 60947-4-1-Table 14
EN 55011 (CISPIR 11) Group 1; Class ISM
0.15 MHz to 30 MHz 0.15 MHz to 30 MHz
ESD immunity
IEC 60947-4-1 (Table 13)
±8 kV air, ±6 kV contact ±8 kV air, ±6 kV contact
Radiated immunity
IEC 60947-4-1
IEC 61000-4-3
10V/m 80 MHz–1000 MHz
3V/m from 1.4 to 2.7 gHz
80% amplitude modulated
1 kHz sine wave
10V/m 80 MHz–1000 MHz
3V/m from 1.4 to 2.7 gHz
80% amplitude modulated
1 kHz sine wave
Conducted immunity
IEC 60947-4-1, IEC 61000-4-6
140 dub (10V rms)
150 kHz–100 MHz
140 dub (10V rms)
150 kHz–100 MHz
Fast transient immunity
IEC 60947-4-1 (Table 13)
IEC 61000-4-4
±4 kV using direct method
with accessory installed in expansion bay
±2 kV using direct method
±4 kV using direct method
with accessory installed in expansion bay
±2 kV using direct method
C440 DeviceNet.book Page 6 Friday, March 25, 2011 10:41 AM
For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616

Table of Contents

Related product manuals