EasyManua.ls Logo

Eaton C440/XTOE - Identity Object Configuration

Eaton C440/XTOE
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DeviceNet Configuration
C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com 15
Identity Instance Attributes (C440)
Attr ID NV Access Rule Name Data Type Attribute Description Semantics
1 Get Vendor ID UINT Identification of each vendor by number The constant 68
2 Get Device type UINT Indication of general type of product The constant 3 for overload
3 Get Product code UINT Identification of a particular product of an
individual vendor
The constant 0 x 110 (C440 DeviceNet
interface with 24 Vdc IO) or
0 x 1111 (C440 DeviceNet
interface with 120 Vac IO)
4 Get Revision STRUCT of: Revision of the item the Identity Object
represents
Major revision USINT The constant 0 x 02
Minor revision USINT The constant 0 x 01
5 Get Status WORD Summary status of device See status section for details
6 Get Serial number UDINT Serial number of comm device 32 bit vendor specific serial number
7 Get Product name SHORT_
STRING
Human readable identification
8 Get State USINT Present state of the device as represented
by the state transition diagram
0 = Nonexistent
1 = Device self testing
2 = Standby
3 = Operational
4 = Major recoverable fault
5 = Major unrecoverable fault
176
(0xB0)
NV Get/ Set User label
(tag name)
SHORT_
STRING
User assigned ASCII string of 16 characters
or less
177
(0xB1)
Get C440 firmware
version
UINT Version of C440 base unit firmware
180
(0xB4)
Get C440 expansion
board ID
USINT Returns a code to indicate what is in the
C440 expansion port
0 = No expansion board
1 = 120 Vac
2 = RS-485
181
(0xB5)
Get C440 serial
number
UDINT 32 bit vendor specific serial number
182
(0xB6)
Get C440 hardware
revision
UINT Hardware revision of C440 base unit; stored
as a 2 byte number with a major and minor
revision
183
(0xB7)
Get C440 product
code
UINT Eaton product code. If the number is odd–it is
ground fault capable
184
(0xB8)
Get C440 firmware
checksum
UDINT The 32 bit checksum of the base C440
firmware
185
(0xB9)
Get C440 firmware
build number
UINT
C440 DeviceNet.book Page 15 Friday, March 25, 2011 10:41 AM
For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616

Table of Contents

Related product manuals