Eaton E Series - Page 32

Protection Para
7
6
5
E_FAP
Protection Parameters
All protection settings, which are related to a speci󰊟c
protection function, can be found here.
For each protection function, the settings are grouped
into the following setting types:
•
Global Protection Parameter
•
•
Set 1 … Set 4
•
•
PSet-Switch (Switching Parameter Set)
•
Control
E_FAQ
Control
Settings for switchgear devices.
(For the E-Series relays »ETR-4000« and »ETR-5000«,
up to 2 switchgear devices are supported.
The »EBR-3000« can control up to 2 Lockout Relays. All
other E-Series relays can control one switchgear device.)
Logic
&
≥1
E_FAR
Programmable Logic
• Up to 80 logic equations•
• 4 selectable gates•
• 4 inputs, 4 outputs per equation•
• timer and memory functions•
Service
E_FAS
Service
This menu branch is primarily needed for testing
purposes. For example:
• Force / disarm outputs•
• Force / disarm analog input and outputs•
• Use the internal signal/fault generator•
• Reboot the protection device•
32 www.eaton.com E-Series Family Quick Start Guide
3 Quick Start – Operation via Panel
3.1 Menu Structure