Eaton E Series - Quick Start: Operation via Panel; Menu Structure

3 Quick Start – Operation via Panel
3.1
Menu Structure
The menu structure o󰊞ers the following top-level menu entries. You enter a menu branch
with Softkey ▶. Softkeys ▲ and ▼ let you navigate to the previous or next one.
Operation
E_FAL
Operation
Here you can 󰊟nd run-time data.
• Measured Values•
• Statistics•
• Status Display•
• Counter and Rev. Data•
• Fault recorder, Event recorder, Waveform recorder•
• Self-Supervision•
• Acknowledge, Reset•
Device Planning
E_FAM
Device Planning
This will usually be your 󰊟rst step during commissioning:
Activate the elements that you need, deactivate elements
that are not needed.
Select the protocol for (SCADA) communication with the
substation.
Device Para
1,0
E_FAN
Device Parameters
This menu branch features all settings that are directly
related to the device, for example:
• Digital inputs and outputs•
• LEDs•
• Settings for the Recorders•
• Communication settings•
System Para
50/60
E_FAO
System Settings
Usually the second commissioning step: Con󰊟gure the
properties of the 󰊟eld, for example:
• Nominal frequency, voltage, current•
• CT and VT ratios•
• VT connection type (Phase to Ground, Phase to•
Phase)
31www.eaton.comE-Series Family Quick Start Guide
3 Quick Start – Operation via Panel
3.1 Menu Structure