Eaton E Series - Configuration via PowerPort-E

5 Con󰈛guration via PowerPort-E
It is recommended to use the PowerPort-E operation software for all setting activities that
are beyond changing only a few values. See the basic description (╚═▷ “2.2 Operation via
PowerPort-E”) about how to establish a connection. A detailed description can be found in
the PowerPort-E manual.
It is strongly recommended to archive all the “*.ErPara” con󰊟guration 󰊟les that you
have come across, both in the state before your modi󰊟cations and the modi󰊟ed one.
The »[File]« menu of PowerPort-E o󰊞ers the usual menu items for handling ErPara 󰊟les
(»Create New Parameter File«, »Open Existing Parameter File«, »Save«,…).
CAUTION!
However, clicking [Save] does not activate changed values (even though the asterisk
tokens disappear). The [Save] menu (and button) does nothing more than saving your
changes to a *.ErPara 󰊟le. Remember to always also transfer the parameters to the
connected device if you want to activate your changes.
68 www.eaton.com E-Series Family Quick Start Guide
5 Con󰊟guration via PowerPort-E