Eaton E Series User Manual

Any repair work carried out on the device requires skilled and competent personnel who
need to be well aware especially of the local safety regulations and have the necessary
experience for working on electronic protection devices and power installations (provided
by evidence).
CAUTION!
We prepared this information carefully, with focus on “a general use”, and intentionally
as a valuable help. But this is still a showcase: Settings might not 󰊟t your application
needs, activities might be dangerous regarding to your application.
NOTICE!
It is, in particular, not intended (and absolutely not possible) to give any explicit advice
with respect to protection settings required for your application. If you feel unsure about
how to con󰊟gure the protection device, feel free to contact the Customer Support of
Eaton.
Please understand that you have to take care of the following:
• Prepare your local application for safety aspects before you start working with this•
document.
• Transfer all examples given in this document to 󰊟t your needs.•
We cannot take over any responsibility for any unwanted e󰊞ect.
We require that managing your application follows all applicable local and international
rules, guidelines and directives, and that all your activities are committed to what is
generally expected from professional work.
Information Concerning Liability and Warranty
Eaton does not accept any liability for damage resulting from conversions or changes
carried out on the device or planning (projecting) work, parameter setting or adjustment
changes done by the customer.
The warranty expires after a device has been opened by others than Eaton specialists.
6 www.eaton.com E-Series Family Quick Start Guide
1 Introduction

Eaton E Series Specifications

General

Series	E Series
Operate Time	15 ms
Contact Arrangement	DPDT
Electrical Life	100, 000 operations
Vibration Resistance	10-55 Hz, 1.5 mm
Mechanical Life	10, 000, 000 operations