Eaton EMR-4000 - Page 111

EMR-4000 IM02602009E
Parameter Description Setting range Default Menu path
Assignment 1 Assignment 1..n, Assignment
List
LEDs group A:
49.Trip
LEDs group B:
81[1].TripCmd
[Device Para
/LEDs
/LEDs group A
/LED 3]
Inverting 1 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 3]
Assignment 2 Assignment 1..n, Assignment
List
LEDs group A: -.-
LEDs group B:
81[3].TripCmd
[Device Para
/LEDs
/LEDs group A
/LED 3]
Inverting 2 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 3]
Assignment 3 Assignment 1..n, Assignment
List
LEDs group A: -.-
LEDs group B:
81[5].TripCmd
[Device Para
/LEDs
/LEDs group A
/LED 3]
Inverting 3 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 3]
Assignment 4 Assignment 1..n, Assignment
List
-.- [Device Para
/LEDs
/LEDs group A
/LED 3]
Inverting 4 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 3]
Assignment 5 Assignment 1..n, Assignment
List
-.- [Device Para
/LEDs
/LEDs group A
/LED 3]
www.eaton.com 111