Eaton EMR-4000 - Device Planning Parameters of the Device

EMR-4000 IM02602009E
Device Planning Parameters of the Device
Parameter Description Options Default Menu path
Hardware Variant
1
Optional Hardware Extension »A« 8 Dig Inp | 5 Rel Out
| 4 Ana Out | URTD |
Zone Interl | IRIG-B
8 Dig Inp | 5 Rel
Out | 4 Ana Out |
URTD | Zone
Interl | IRIG-B
[EMR-4000]
Hardware Variant
2
Optional Hardware Extension »0« Phase Current
5A/1A, Ground Current
5A/1A,
»1« Phase Current
5A/1A, Sensitive Ground
Current 5A/1A
Phase Current
5A/1A, Ground
Current 5A/1A
[EMR-4000]
Communication Communication »B« RS 485: Modbus
RTU,
»H« Ethernet: IEC61850,
»I« RS 485 + Ethernet:
Modbus RTU + Modbus
TCP
»I« RS 485 +
Ethernet: Modbus
RTU + Modbus
TCP
[EMR-4000]
Printed Circuit
Board
Printed Circuit Board »A« Standard,
»B« Conformal Coating
»A« Standard [EMR-4000]
There are two mounts available for the EMR-4000: a Standard Mount and a Projection Mount. To order the EMR-4000
with a Standard Mount, append the device code with a zero (0). To order the EMR-4000 with a Projection Mount, ap-
pend the device code with a one (1). Refer to the table for details of the available device options.
EMR-4000 Eaton Motor Relay
Removable Terminals
EMR-4000 A 0 B A 1
Choose from the following options.
Hardware Option 1
8 DI, 5 Outputs, 4AO, Removable Terminals, Zone
Interlocking,URTD Interface, IRIG-B, Small Display.
A
Hardware Option 2
Phase Current 5A/1A, Ground Current 5A/1A,
Power Supply Range: 19-300 Vdc, 40-250 Vac.
0
(Zero)
Phase Current 5A/1A, Sensitive Ground Current
0.5A/0.1A, Power Supply Range: 19-300 Vdc,
1
www.eaton.com 24