Eaton EMR-4000 - Direct Commands of the System Module

EMR-4000 IM02602009E
Direct Commands of the System Module
Parameter Description Setting range Default Menu path
Ack RO LED Comm
TCmd
Reset the Relay Outputs, LEDs, Communication, and the
Trip Command.
Inactive,
Active
Inactive [Operation
/Reset
/Flags]
Ack LED All acknowledgeable LEDs will be acknowledged. Inactive,
Active
Inactive [Operation
/Reset
/Flags]
Ack RO All acknowledgeable Relay Outputs will be
acknowledged.
Inactive,
Active
Inactive [Operation
/Reset
/Flags]
Ack Comm Communication will be acknowledged. Inactive,
Active
Inactive [Operation
/Reset
/Flags]
Res OperationsCr Reset all counters in history group operations Inactive,
Active
Inactive [Operation
/Reset
/History]
Res AlarmCr Reset all counters in history group alarms Inactive,
Active
Inactive [Operation
/Reset
/History]
Res TripCmdCr Reset all counters in history group trips Inactive,
Active
Inactive [Operation
/Reset
/History]
Res TotalCr Reset all counters in history group total Inactive,
Active
Inactive [Operation
/Reset
/History]
Res All Reset of all Counters Inactive,
Active
Inactive [Operation
/Reset
/History]
Reboot Rebooting the device. No,
Yes
No [Service
/General]
www.eaton.com 274