Eaton EMR-4000 - Current - Measured Values

EMR-4000 IM02602009E
Current - Measured Values
CT
If the device is not equipped with an voltage measuring card the first measuring input on the first current measuring
card (slot with the lowest number) will be used as the reference angle (» IA«).
Value Description Menu path
IA Fund. Measured value: Phase current (Fundamental) [Operation
/Measured Values
/Current Fund.]
IB Fund. Measured value: Phase current (Fundamental) [Operation
/Measured Values
/Current Fund.]
IC Fund. Measured value: Phase current (Fundamental) [Operation
/Measured Values
/Current Fund.]
IX meas Fund. Measured value (measured): IX (Fundamental) [Operation
/Measured Values
/Current Fund.]
IR calc Fund. Measured value (calculated): IR (Fundamental) [Operation
/Measured Values
/Current Fund.]
I0 Fund. Measured value (calculated): Zero current (Fundamental) [Operation
/Measured Values
/Current Fund.]
I1 Fund. Measured value (calculated): Positive phase sequence current
(Fundamental)
[Operation
/Measured Values
/Current Fund.]
I2 Fund. Measured value (calculated): Unbalanced load current (Fundamental) [Operation
/Measured Values
/Current Fund.]
Angle IA Measured Value (Calculated): Angle of Phasor IA [Operation
/Measured Values
/Current Fund.]
Angle IB Measured Value (Calculated): Angle of Phasor IB [Operation
/Measured Values
/Current Fund.]
www.eaton.com 158