Eaton EMR-4000 - Manual Acknowledgment; Manual Acknowledgment Via Powerport-E

EMR-4000 IM02602009E
Manual Acknowledgment
•Press the »Ack/Rst« button on the panel.
•Select the item to be acknowledged via the softkeys:
•Relay Outputs;
•LEDs;
•SCADA;
•A trip command; or
•All the above mentioned items at once.
•Press the Softkey with the »Wrench-Symbol«.
•Enter the password.
Manual Acknowledgment Via PowerPort-E
•If PowerPort-E is not running, please start the application.
•If device data have not been downloaded recently, select »Receive Data From The Device« from the »Device«
menu.
•Double click on the »Operation« icon in the navigation tree.
•Double click on the »Acknowledgment« icon within the operation menu.
•Double click the entry within the pop-up that is to be acknowledged.
•Press the »Execute immediately« button.
•Enter the password.
www.eaton.com 197