Eaton EMR-4000 - Page 220

EMR-4000 IM02602009E
Waveform Recorder Module Input States
Name Description Assignment via
Start1-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start2-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start3-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start4-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start5-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start6-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start7-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
Start8-I State of the module input:: Trigger event / start recording if: [Device Para
/Recorders
/Waveform rec]
www.eaton.com 220