Eaton EMR-4000 - Page 238

EMR-4000 IM02602009E
Name Description
CT.IA THD Measured Value (Calculated): IA Total Harmonic Current
CT.IB THD Measured Value (Calculated): IB Total Harmonic Current
CT.IC THD Measured Value (Calculated): IC Total Harmonic Current
CT.%(I2/I1) Measured value (calculated): I2/I1, phase sequence will be taken into account automatically.
CT.%(I2/I1) max Measured value (calculated): I2/I1 maximum value, phase sequence will be taken into account automatically
MStart.IA FLA Measured value: Phase current multiples of FLA
49.I2T Used Thermal capacity used.
URTD.WD1 Winding 1
URTD.WD1 max Winding1 Maximum Value
URTD.WD2 Winding 2
URTD.WD2 max Winding2 Maximum Value
URTD.WD3 Winding 3
URTD.WD3 max Winding3 Maximum Value
URTD.WD4 Winding 4
URTD.WD4 max Winding4 Maximum Value
URTD.WD5 Winding 5
URTD.WD5 max Winding5 Maximum Value
URTD.WD6 Winding 6
URTD.WD6 max Winding6 Maximum Value
URTD.MB1 Motor Bearing 1
URTD.MB1 max Motor Bearing1 Maximum Value
URTD.MB2 Motor Bearing 2
URTD.MB2 max Motor Bearing2 Maximum Value
URTD.LB1 Load Bearing 1
URTD.LB1 max Load Bearing1 Maximum Value
URTD.LB2 Load Bearing 2
URTD.LB2 max Load Bearing2 Maximum Value
URTD.Aux1 Auxiliary1
URTD.Aux1 max Auxiliary1 Maximum Value
URTD.Aux2 Auxiliary2
URTD.Aux2 max Auxiliary2 Maximum Value
URTD.RTD Max Maximum temperature of all channels.
RTD.Hottest WD Hottest motor winding temperature in degrees C.
RTD.Hottest MB Hottest motor bearing temperature in degrees C. Resettable with "Sys Res OperationsCr" or "All".
RTD.Hottest LB Hottest load bearing temperature in degrees C. Resettable with "Sys Res OperationsCr" or "All".
RTD.Hottest Aux Hottest Auxiliary temperature in degrees C. Resettable with "Sys Res OperationsCr" or "All".
ECr.Syst VA RMS Measured VAs (RMS)
www.eaton.com 238