EMR-4000 IM02602009E
During setting parameters the C-Button will be used for the cancelling of
parameter changes. Because of that it is not possible, to acknowledge (LEDs,
Output Relays...) as long as there are non saved (cached only) parameters.
Acknowledgement can only be executed, when the upper right corner of the
display shows this symbol:
The passwords are part of the device (fixed assignments). That means,
passwords will not be overwritten, if a parameter file is transmitted into a
device.
Existing passwords are persistent (assined to a device). If an offline created
parameter file is transmitted into a device, or if a parameter file is transmitted
from one device to another, this will have no impact on existing passwords
within the device.
www.eaton.com 320
To Next Page
Loading...
