EMR-4000 IM02602009E
Pushing the softkey »Mode« leads to the menu »General Settings«.
In this menu the switching authority can be changed.
Select between »Local« or »Local and Remote«.
Now it is possible to execute switching commands at the HMI.
Push the »right arrow« softkey to get to the control page.
The breaker is opened, therefore it can be closed only.
After pushing the softkey »CLOSE« a confirmation window appears.
When you are sure to proceed with the switching operation, press the softkey »YES«.
www.eaton.com 418
To Next Page
Loading...
