EMR-4000 IM02602009E
Signal Description
MB 1 Trip Motor Bearing 1 Signal: Trip
MB 1 Alarm Motor Bearing 1 Alarm RTD Temperature Protection
MB 1 Timeout Alarm Motor Bearing 1 Timeout Alarm
MB 1 Invalid Motor Bearing 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
MB 2 Trip Motor Bearing 2 Signal: Trip
MB 2 Alarm Motor Bearing 2 Alarm RTD Temperature Protection
MB 2 Timeout Alarm Motor Bearing 2 Timeout Alarm
MB 2 Invalid Motor Bearing 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
LB 1 Trip Load Bearing 1 Signal: Trip
LB 1 Alarm Load Bearing 1 Alarm RTD Temperature Protection
LB 1 Timeout Alarm Load Bearing 1 Timeout Alarm
LB 1 Invalid Load Bearing 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
LB 2 Trip Load Bearing 2 Signal: Trip
LB 2 Alarm Load Bearing 2 Alarm RTD Temperature Protection
LB 2 Timeout Alarm Load Bearing 2 Timeout Alarm
LB 2 Invalid Load Bearing 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
Aux1 Trip Auxiliary 1 Signal: Trip
Aux1 Alarm Auxiliary 1 Alarm RTD Temperature Protection
Aux1 Timeout Alarm Auxiliary 1 Timeout Alarm
Aux1 Invalid Auxiliary 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
Aux2 Trip Auxiliary 2 Signal: Trip
Aux2 Alarm Auxiliary 2 Alarm RTD Temperature Protection
Aux2 Timeout Alarm Auxiliary 2 Timeout Alarm
Aux2 Invalid Auxiliary 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
Trip WD Group Trip all Windings
Alarm WD Group Alarm all Windings
TimeoutAlmWDGrp Timeout Alarm all Windings
WD Group Invalid Winding Group Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
Trip MB Group Trip all Motor Bearings
Alarm MB Group Alarm all Motor Bearings
TimeoutAlmMBGrp Timeout Alarm all Motor Bearings
MB Group Invalid Motor Bearing Group Signal: Invalid Temperature Measurement Value (e.g caused by an
defective or interrupted RTD Measurement)
www.eaton.com 735
To Next Page
Loading...
