Eaton EMR-4000 - Page 740

EMR-4000 IM02602009E
URTDII Module Fiber Optic Connection to the Protective Device
The figure above shows the fiber optic connections between the URTDII Module and the protective device. The
protective device supports the optical fiber connection. The following table lists the fiber optic order options.
Fiber Optic Order Options.
Cutler-Hammer Agilent Technologies
Length Catalog Number Number
3.3 ft (1 m) MPFO-1 HBFR-ELS001 or HBFRRLS001
16.4 ft (5 m) MPFO-5 HBFR-ELS005 or HBFRRLS005
32.8 ft (10 m) MPFO-10 HBFR-ELS010 or HBFRRLS010
82.0 ft (25 m) MPFO-25 HBFR-ELS025
164.0 ft (50 m) MPFO-50 HBFR-ELS050
246.1 ft (75 m) MPFO-75 HBFR-ELS075
249.3 ft (76 m) MPFO-76 HBFR-ELS076
328.1 ft (100 m) MPFO-100 HBFR-ELS100
393.7 ft (120 m) MPFO-120 HBFR-ELS120
Uncut Fiber HBFR-EUS (Length)
The optical fiber is the only method of transmitting temperature data from the URTDII Module to the protective device.
Preassembled plastic optical fibers with connectors can be ordered from Eaton, or from any distributor of Agilent
www.eaton.com 740
UNIVERSAL
RTD MODULE
OpticalFiberfor URTD
Communicationsto
Protective Device
(PreferredMethod)
Connect to
Terminal X102