Eaton EMR-4000 - Page 832

EMR-4000 IM02602009E
Name Description
Sys.Maint Mode-I Module Input State: Arc Flash Reduction Maintenance Switch
Sys.Min. 1 param changed Signal: At least one parameter has been changed
Sys.PS 1 Signal: Parameter Set 1
Sys.PS 2 Signal: Parameter Set 2
Sys.PS 3 Signal: Parameter Set 3
Sys.PS 4 Signal: Parameter Set 4
Sys.PS1-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS2-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS3-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS4-I State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PSS manual Signal: Manual switch over of a Parameter Set
Sys.PSS via Comm Signal: Parameter Set Switch via Communication
Sys.PSS via Inp fct Signal: Parameter Set Switch via Input Function
Sys.Res AlarmCr Signal:: Res AlarmCr
Sys.Res OperationsCr Signal:: Res OperationsCr
Sys.Res TotalCr Signal:: Res TotalCr
Sys.Res TripCmdCr Signal:: Res TripCmdCr
www.eaton.com 832