Eaton EMR-4000 - Page 973

EMR-4000 IM02602009E
Name Description
IEC61850.VirtOut19-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut20-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut21-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut22-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut23-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut24-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut25-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut26-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut27-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut28-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut29-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut30-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut31-I Module input state: Binary state of the Virtual Output (GGIO)
IEC61850.VirtOut32-I Module input state: Binary state of the Virtual Output (GGIO)
IRIG-B.Active Signal: Active
IRIG-B.Inverted Signal: IRIG-B inverted
IRIG-B.Control Signal1 Signal: IRIG-B Control Signal
IRIG-B.Control Signal2 Signal: IRIG-B Control Signal
IRIG-B.Control Signal4 Signal: IRIG-B Control Signal
IRIG-B.Control Signal5 Signal: IRIG-B Control Signal
IRIG-B.Control Signal6 Signal: IRIG-B Control Signal
IRIG-B.Control Signal7 Signal: IRIG-B Control Signal
IRIG-B.Control Signal8 Signal: IRIG-B Control Signal
IRIG-B.Control Signal9 Signal: IRIG-B Control Signal
IRIG-B.Control Signal10 Signal: IRIG-B Control Signal
IRIG-B.Control Signal11 Signal: IRIG-B Control Signal
IRIG-B.Control Signal12 Signal: IRIG-B Control Signal
IRIG-B.Control Signal13 Signal: IRIG-B Control Signal
IRIG-B.Control Signal14 Signal: IRIG-B Control Signal
IRIG-B.Control Signal15 Signal: IRIG-B Control Signal
IRIG-B.Control Signal16 Signal: IRIG-B Control Signal
IRIG-B.Control Signal17 Signal: IRIG-B Control Signal
IRIG-B.Control Signal18 Signal: IRIG-B Control Signal
SNTP.SNTP active Signal: If there is no valid SNTP signal for 120 sec, SNTP is regarded as inactive.
Statistics.ResFc all Signal: Resetting of all Statistic values (Current Demand, Power Demand, Min, Max)
Statistics.ResFc I Demand Signal: Resetting of Statistics - Current Demand (avg, peak avg)
Statistics.ResFc P Demand Signal: Resetting of Statistics - Power Demand (avg, peak avg)
www.eaton.com 973