Eaton EX Pulsar Series - User Manual

Eaton EX Pulsar Series

66 pages

To Next Page

To Next Page

Loading...

w w w . e a t o n . c o m

Installation and User Manual

English

EX

2200 RT 2U

3000 RT 2U

EXB RT 3U

Pulsar Series

86-86710-00 A02 UM.indd 1 14/01/2009 10:56:17

インストレーションおよび

取扱説明書

Installation and User Manual

EX

2200 RT 2U

3000 RT 2U

EXB RT 3U

Pulsar Series

日本語

English

www.eaton.com

Table of Contents

Questions and Answers

S
Shannon FarrellSep 8, 2025
What to do if Eaton EX Pulsar load is no longer supplied if AC power fails?
- J
  Jenna SnowSep 8, 2025
  If the load is no longer supplied when AC power fails, it could be because: * The rotary switch on the HotSwap MBP module is set to the Bypass position. * The wiring between the UPS and the HotSwap MBP module is not correct. * The UPS is shutdown. Set the rotary switch on the HotSwap MBP module to the Normal position and check the wiring between the UPS and the HotSwap MBP module.
N
nicholas39Sep 10, 2025
What to do if Eaton EX Pulsar load is no longer supplied after AC-power fails?
- S
  suttonrobertSep 10, 2025
  If the Eaton UPS load is no longer supplied after AC power fails, ensure that the rotary switch on the HotSwap MBP module is set to the Normal position. If it is already in the Normal position, check the wiring between the UPS and the HotSwap MBP module.
M
Michelle MooreSep 12, 2025
Why is the Eaton EX Pulsar UPS load no longer supplied when the rotary switch on the HotSwap MBP module is set to the Bypass position?
- K
  Kenneth OconnellSep 12, 2025
  If the Eaton UPS load is not supplied when the rotary switch on the HotSwap MBP module is in the Bypass position, the protected devices may be incorrectly wired to the UPS output instead of the HotSwap MBP module. Alternatively, the AC power cord may be connected to the UPS input instead of the HotSwap MBP module. Check the wiring between the UPS and the HotSwap MBP module.
J
Jeffrey MillerSep 13, 2025
What to do if the Eaton EX Pulsar load is no longer supplied after AC-power fails?
- K
  kathryn57Sep 14, 2025
  If the load is not supplied following an AC power failure, ensure the rotary switch on the HotSwap MBP module is in the Normal position. Also, verify the wiring between the Eaton UPS and the HotSwap MBP module.
D
Donna BakerSep 15, 2025
What to do if Eaton EX Pulsar load is no longer supplied in Normal position?
- C
  Craig JacksonSep 16, 2025
  If the load stops being supplied when the rotary switch on the HotSwap MBP module is in the Normal position, try starting the UPS. Also, check the wiring between the UPS and the HotSwap MBP module.
S
Shannon VillarrealSep 18, 2025
What to do if Eaton EX Pulsar load is no longer supplied in Bypass position?
- H
  hunteramberSep 18, 2025
  If the load is not supplied when the rotary switch on the HotSwap MBP module is in the Bypass position, check the wiring between the Eaton UPS and the HotSwap MBP module.

Eaton EX Pulsar Series Specifications

General

Model Series	EX Pulsar Series
Frequency	50/60 Hz
Relative Humidity	0-95% non-condensing
Communication	USB
Form Factor	Tower
Battery Type	Sealed Lead-Acid (SLA)
Operating Temperature	0 to 40°C
Storage Temperature	-15 to 45°C

Related product manuals

Preview: Eaton EX 700

Preview: Eaton EX RT 5

Eaton EX EXB 1000

Preview: Eaton EX RT EXB 5

Eaton EX RT EXB 5

Preview: Eaton EX 2200 RT 2U

Eaton EX 2200 RT 2U

Eaton EX 3000 RT 2U

Preview: Eaton EX 2200 RT 3U

Eaton EX 2200 RT 3U