EasyManua.ls Logo

Eaton H-Max Series - H-Max Technical Data

Eaton H-Max Series
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Manual MN040029EN H-Max Installation Manual Addendum
Effective February 2017
H-Max Technical Data
Attribute
Description
Specification
Mains connection
Input voltage U
in
525-600V, -10 to 10%
Input frequency
50-60 Hz, -5 to 10%
Connection to mains
Once per minute or less
Starting delay
6s (FS5 to FS6); 8s (FS7 to FS9)
Motor connection
Output voltage
0-Uin
Continuous output current
I
L
: Ambient temperature maximum 40°C, up to 50°C with
derating, overload 1.1 x I
L
(1min./10 mins)
Output frequency
0-320 Hz
Frequency resolution
0.01 Hz
Control characteristics
Switching frequency
FS5-FS9: 1.5-6 kHz
Default: 2 kHz
For a product that is configured for a C4 installation on IT
network the maximum switching frequency is limited to
default 2kHz.
Automatic switching frequency derating in case of
overload.
Frequency reference
Analog input
Resolution 0.1% (10-bit), accuracy +1%
Panel reference
Resolution 0.01 Hz
Field weakening point
8–320 Hz
Acceleration
0.1–3000 sec.
Deceleration
0.1–3000 sec.
Ambient conditions
Ambient operating temperature
I
L
: –10°C (no frost) to 40°C, up to 50°C with derating
Storage temperature
–40° to 70°C
Relative humidity
0–95% R
H
, non-condensing, non-corrosive
Air quality:
- Chemical vapors
- Mechanical particles
Tested according to IEC 60068-2-60 Test Ke: Flowing
mixed gas corrosion test, Method 1 (H
2
S [hydrogen
sulfide] and SO
2
[sulfur dioxide]
Designed according to:
IEC 60721-3-3, unit in operation, class 3C2
IEC 60721-3-3, unit in operation, class 3S2
Altitude
100% load capacity (no derating) up to 1000m
1% derating for each 100m above 1000m
Max. altitudes:
525–600V: 2000m (TN and IT systems, no corner
grounding)
Voltage for I/O signals:
Up to 2000m: Allowed up to 240V
2000–4500m: Allowed up to 120V
Vibration:
- EN61800-5-1
- EN60668-2-6
5–150 Hz
Displacement amplitude:
1 mm (peak) at 5–15.8 Hz (FS4–FS9)
Maximum acceleration amplitude:
1g at 15.8–150 Hz (FS4–FS9)
Shock:
- EN61800-5-1
- EN60068-2-27
UPS drop test (for applicable UPS weights)
Storage and shipping: Maximum 15g, 11 ms (in package)
Enclosure class
IP21/Type 1 standard in entire kW/hp range
IP54/Type 12 option
Note: Keypad required for IP54/Type12

Table of Contents

Other manuals for Eaton H-Max Series

Related product manuals