Parameter List
12 H-Max HVAC Drives MN04008004E—September 2011 www.eaton.com
Parameter Group 2.3—Basic Parameters
Basic P2.3.9.1 Start logic 1304
P2.3.9.2 INTLK Timeout 1305
P2.3.9.3 Delay Time 1306
P2.3.9.4 Intrlk Stop Mode 1356
P2.3.9.5 Interlock 1 Text 1315
P2.3.9.6 Interlock 2 Text 1316
P2.3.9.7 Interlock 3 Text 1317
Parameter Group 2.4—Analog Outputs
Analog Output 1 P2.4.1.1 AO1 Function 10050
P2.4.1.2 AO1 Filter Time 10051
P2.4.1.3 AO1 Min Signal 10052
P2.4.1.4 AO1 MinScale 10053
P2.4.1.5 AO1 MaxScale 10054
P2.4.1.6 AO1 Invert 10060
Parameter Group 2.5—Digital Outputs
Digital Output 1 P2.5.1.1 RO1 function 11001
P2.5.1.2 RO1 Invert 11020
P2.5.1.3 RO1 ON delay 11002
P2.5.1.4 RO1 OFF delay 11003
Digital Output 2 P2.5.2.1 RO2 function 11004
P2.5.2.2 RO2 Invert 11021
P2.5.2.3 RO2 ON delay 11005
P2.5.2.4 RO2 OFF delay 11006
Digital Output 3 P2.5.3.1 RO3 function 11007
Supervision P2.5.9.1 Superv1 Item 1622
P2.5.9.2 Supervision #1 mode 1623
P2.5.9.3 Supervision #1 limit 1624
P2.5.9.4 Supervision #1 limit hysteresis 1625
P2.5.9.5 Superv2 Item 1626
P2.5.9.6 Supervision #2 mode 1627
P2.5.9.7 Supervision #2 limit 1628
P2.5.9.8 Supervision #2 limit hysteresis 1629
Parameter Group Name Parameter Number Parameter Name ID
To Next Page
Loading...
