Eaton H-Max Series - Page 17

Parameter List
H-Max HVAC Drives MN04008004E—September 2011 www.eaton.com 13
Parameter Group 2.6—Drive Control
Basic P2.6.1.1 Start Function 505
P2.6.1.2 Stop Function 506
P2.6.1.3 InhibitDirection 1336
P2.6.1.4 Reference Unit 1362
P2.6.1.5 Keypad Reference 184
P2.6.1.6 Keypad Direction 123
P2.6.1.7 Keypad Reference copy 181
P2.6.1.8 Keypad Stop Button 114
P2.6.1.9 Accel Time 2 502
P2.6.1.10 Decel Time 2 503
P2.6.1.11 RampselectMode 1333
P2.6.1.12 Accel2Threshold 526
P2.6.1.13 Decel2Threshold 1334
P2.6.1.14 S-Ramp 1 Shape 500
P2.6.1.15 S-Ramp 2 Shape 501
Skip Frequencies P2.6.2.1 Range 1 Low Lim 509
P2.6.2.2 Range 1 High Lim 510
P2.6.2.3 Range 2 Low Lim 511
P2.6.2.4 Range 2 High Lim 512
P2.6.2.5 Range 3 Low Lim 513
P2.6.2.6 Range 3 High Lim 514
P2.6.2.7 Range 4 Low Lim 1337
P2.6.2.8 Range 4 High Lim 1338
P2.6.2.9 Range 5 Low Lim 1339
P2.6.2.10 Range 5 High Lim 1340
P2.6.2.11 Range 6 Low Lim 1341
P2.6.2.12 Range 6 High Lim 1342
P2.6.2.13 RampTimeFactor 518
Parameter Group 2.7—Motor Control
Motor Control P2.7.1 V/Hz RatioSelect 108
P2.7.2 Field WeakngPnt 602
P2.7.3 Voltage at FWP 603
P2.7.4 V/Hz Mid Freq 604
P2.7.5 V/Hz Mid Voltage 605
P2.7.6 Zero Freq Voltg 606
P2.7.7 Switching Freq 601
Parameter Group Name Parameter Number Parameter Name ID