Eaton H-Max Series - Dimensions & Mounting

Parameter List
14 H-Max HVAC Drives MN04008004E—September 2011 www.eaton.com
Parameter Group 2.8—Faults
Faults P2.8.1.1 AI Low Fault 700
P2.8.1.2 Undervoltage Flt 727
P2.8.1.3 OutputPhase Flt 702
P2.8.1.4 Motor Duty Cycle 708
P2.8.1.5 Underload Flt 713
P2.8.1.6 Motor Therm Prot 704
P2.8.1.7 MotAmbient Temp 705
P2.8.1.8 ZeroSpeedCooling 706
P2.8.1.9 ThermTimeConst 707
P2.8.1.10 Thermistor Fault 732
P2.8.1.11 External Fault 701
P2.8.1.12 FieldbusComm Flt 733
P2.8.1.13 InputPhaseFault 730
P2.8.1.14 MotorStall Flt 709
P2.8.1.15 PID1 Supervision 749
P2.8.1.16 PID2 Supervision 757
P2.8.1.17 SlotCommFlt 734
P2.8.1.18 Preset Alarm Freq 183
Automatic Reset P2.8.2.1 Automatic Reset 731
P2.8.2.2 Restart function 719
P2.8.2.3 Wait Time 717
P2.8.2.4 Trial Time 718
P2.8.2.5 Number of trials 759
P2.8.2.6 Undervoltage Flt 720
P2.8.2.7 Overvoltage Flt 721
P2.8.2.8 Overcurrent Flt 722
P2.8.2.9 AI Low Fault 723
P2.8.2.10 UnitOverTemp Flt 724
P2.8.2.11 MotorOverTempFlt 725
P2.8.2.12 External Fault 726
P2.8.2.13 IGBT temp 1358
Parameter Group Name Parameter Number Parameter Name ID