Eaton H-Max Series - Page 20

Parameter List
16 H-Max HVAC Drives MN04008004E—September 2011 www.eaton.com
Parameter Group 2.9—PID Controller, continued
PID Controller 1, Process Supervision P2.9.1.5.1 Enable Superv, PID Controller 1 735
P2.9.1.5.2 Upper limit, PID Controller 1 736
P2.9.1.5.3 Lower limit, PID Controller 1 758
P2.9.1.5.4 Delay, PID Controller 1 737
PID Controller 1, Pressure Loss Compensation P2.9.1.6.1 Enable SP 1, PID Controller 1 1529
P2.9.1.6.2 SP 1 Max Comp., PID Controller 1 1530
P2.9.1.6.3 Enable SP 2, PID Controller 1 1531
P2.9.1.6.4 SP 2 Max Comp., PID Controller 1 1532
PID Controller 2, Basic Settings P2.9.2.1.1 Gain, PID Controller 2 1631
P2.9.2.1.2 Integration Time, PID Controller 2 1632
P2.9.2.1.3 Derivation Time, PID Controller 2 1633
P2.9.2.1.4 ProcessUnitSel, PID Controller 2 1635
P2.9.2.1.5 ProcessUnitMin, PID Controller 2 1664
P2.9.2.1.6 ProcessUnitMax, PID Controller 2 1665
P2.9.2.1.7 ProcessUnitDecimals, PID Controller 2 1666
P2.9.2.1.8 Error Inversion, PID Controller 2 1636
P2.9.2.1.9 Dead Band, PID Controller 2 1637
P2.9.2.1.10 Dead band delay, PID Controller 2 1638
PID Controller 2, Setpoints P2.9.2.2.1 Keypad SP 1, PID Controller 2 1640
P2.9.2.2.2 Keypad SP 2, PID Controller 2 1641
P2.9.2.2.3 Ramp Time, PID Controller 2 1642
P2.9.2.2.4 SetPt 1 Source, PID Controller 2 1643
P2.9.2.2.5 SetPt 1 min, PID Controller 2 1644
P2.9.2.2.6 SP 1 maximum, PID Controller 2 1645
P2.9.2.2.7 SP 2 Source, PID Controller 2 1646
P2.9.2.2.8 SP 2 minimum, PID Controller 2 1647
P2.9.2.2.9 SP 2 maximum, PID Controller 2 1648
PID Controller 2, Feedbacks P2.9.2.3.1 Function, PID Controller 2 1650
P2.9.2.3.2 Gain, PID Controller 2 1651
P2.9.2.3.3 FeedBack 1 Srce, PID Controller 2 1652
P2.9.2.3.4 FB 1 Minimum, PID Controller 2 1653
P2.9.2.3.5 FB 1 Maximum, PID Controller 2 1654
P2.9.2.3.6 FB 2 Source, PID Controller 2 1655
P2.9.2.3.7 FB 2 Minimum, PID Controller 2 1656
P2.9.2.3.8 FB 2 Maximum, PID Controller 2 1657
PID Controller 2, Process Supervision P2.9.2.4.1 Enable Superv, PID Controller 2 1659
P2.9.2.4.2 Upper limit, PID Controller 2 1660
P2.9.2.4.3 Lower limit, PID Controller 2 1661
P2.9.2.4.4 Delay, PID Controller 2 1662
Parameter Group Name Parameter Number Parameter Name ID