Eaton H-Max Series - Page 21

Parameter List
H-Max HVAC Drives MN04008004E—September 2011 www.eaton.com 17
Parameter Group 2.10—Fixed Frequencies
Fixed Frequencies P2.10.1 Preset Freq 1 105
P2.10.2 Preset Freq 2 106
P2.10.3 Preset Freq 3 126
P2.10.4 Preset Freq 4 127
P2.10.5 Preset Freq 5 128
P2.10.6 Preset Freq 6 129
P2.10.7 Preset Freq 7 130
Parameter Group 2.11—Fire Mode
Fire Mode P2.11.1 Firemode Freq 1598
Parameter Group 2.12—Multi-Pump
Multi-Pump P2.12.1 Number of motors 1001
P2.12.2 Interlock function 1032
P2.12.3 Include FC 1028
P2.12.4 Autochange 1027
P2.12.5 Autochange interval 1029
P2.12.6 Autochange: frequency limit 1031
P2.12.7 Autochange: motor limit 1030
P2.12.8 Bandwidth 1097
P2.12.9 Bandwidth delay 1098
Parameter Group 2.13—Braking
Braking P2.13.1 DC Brake Current 507
P2.13.2 DC Time Stop 508
P2.13.3 DC BrakeFreqStop 515
P2.13.4 StartMagnTime 516
P2.13.5 StartMagnCurrent 517
P2.13.6 Preheat Current 1335
Parameter Group 2.14—Fieldbus
Fieldbus P2.14.1 FB Data Out1 Sel 852
P2.14.2 FB Data Out2 Sel 853
P2.14.3 FB Data Out3 Sel 854
P2.14.4 FB Data Out4 Sel 855
P2.14.5 FB Data Out5 Sel 856
P2.14.6 FB Data Out6 Sel 857
P2.14.7 FB Data Out7 Sel 858
P2.14.8 FB Data Out8 Sel 859
Parameter Group 2.15—Second Param Set
Motor 2 P2.15.1.1 Motor Nom Currnt, Set2 1347
P2.15.1.2 Motor Nom Voltg, Set2 1348
P2.15.1.3 Motor Nom Freq, Set2 1349
P2.15.1.4 Motor Nom Speed, Set2 1350
P2.15.1.5 MotorPowerFactor, Set2 1351
P2.15.1.6 Current Limit, Set2 1352
P2.15.1.7 Motor Therm Prot, Set2 1353
Parameter Group Name Parameter Number Parameter Name ID