Eaton MP-4000 - Page 38

Page 4-24
www.eaton.com
IB02602002E MP-4000
Table 4.4 History Mode Display.
PAGE LINE DISPLAY COMPLETE HELP MESSAGE DESCRIPTION
HH:MM:SS TIME OF RESET Time when voltage unbalance failure alarms function was reset.
OF A XX OF A XX NUMBER OF OVERFREQUENCY ALARMS
SINCE LAST RESET
Total number of over frequency alarms that occurred since last reset.
MM/DD/YY DATE OF RESET Date when over frequency failure alarms function was reset.
HH:MM:SS TIME OF RESET Time when over frequency failure alarms function was reset.
OV A XX OV A XX NUMBER OF OVERVOLTAGE ALARMS
SINCE LAST RESET
Total number of over voltage alarms that occurred since last reset.
MM/DD/YY DATE OF RESET Date when over voltage failure alarms function was reset.
HH:MM:SS TIME OF RESET Time when over voltage failure alarms function was reset.
UV A XX UV A XX NUMBER OF UNDERVOLTAGE ALARMS
SINCE LAST RESET
Total number of under voltage alarms that occurred since last reset.
MM/DD/YY DATE OF RESET Date when under voltage failure alarms function was reset.
HH:MM:SS TIME OF RESET Time when under voltage failure alarms function was reset.
UP A XX UP A XX NUMBER OF UNDERPOWER ALARMS
SINCE LAST RESET
Total number of under power alarms that occurred since last reset.
MM/DD/YY DATE OF RESET Date when under power failure alarms function was reset.
HH:MM:SS TIME OF RESET Time when under power failure alarms function was reset.
FP A XX FP A XX NUMBER OF POWER FACTOR ALARMS
SINCE LAST RESET
Total number of power factor alarms that occurred since last reset.
MM/DD/YY DATE OF RESET Date when power factor alarms function was reset.
HH:MM:SS TIME OF RESET Time when power factor alarms function was reset.
HIST TOT HISTORY TOTALS FOR MOTOR
TRPS TOTAL NUMBER OF TRIPS SINCE RESET Total number of trips that occurred since last reset.
DATE OF RESET Date when trips function was reset.
TIME OF RESET Time when trips function was reset.
TRT XXXX TOTAL RUN TIME SINCE RESET Total motor run time since last reset.
DATE OF RESET Date when total motor run time function was reset.
TIME OF RESET Time when total motor run time function was reset.
TOCS
XXXX
TOTAL OPERATION COUNT SINCE
RESET
Total operation count since last reset.
DATE OF RESET Date when total operation function was reset.
TIME OF RESET Time when total operation function was reset.
Table 4-5. Log Mode Display.
SUB-
MENU
LINE DISPLAY COMPLETE HELP MESSAGE DESCRIPTION
LOG LOG OF EVENTS MODE
LOG
BOOK
LOG BOOK OF THE LAST 100 EVENTS
START START EVENT - A STOP TO START
TRANSITION WAS MADE
First event recorded. For example, the event could be any of the following six types:
Start, stop, emergency override, exiting program mode, alarm condition, or trip condition.
The events listed in the Line column show all of the different types of events. But a true
LOG BOOK page has any number of different events in the order that they occur. From
the LOG BOOK display, press line up pushbutton to see the latest event. Press it again for
the next most recent event and so on. From the LOG BOOK display, press the line down
pushbutton to see the oldest logged event. Press it again to see the next oldest and so on.
MM/DD/YY DATE OF LOGGED EVENT Date that event occurred.
HH.MM.SS TIME OF LOGGED EVENT Time that event occurred.
STOP STOP EVENT - A TRANSITION TO THE
STOP STATE WAS MADE
MM/DD/YY DATE OF LOGGED EVENT Date that event occurred.
HH.MM.SS TIME OF LOGGED EVENT Time that event occurred.