www.eaton.com
Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE Page 24/65
4.4.2 Advanced tests
For test purpose, it is also possible to display the messages in verbose mode and check the content.
Messages in verbose mode:
z Event log:
It is possible to consult the Event log
.
z Advanced trace:
We warn you against the use of disk space for this Trace mode.
To validate verbose mode :
> in the bin/dae and bin/netsystray directory of the application, rename the file called debugMode.off
into debugMode.on,
> restart the EATON Network Shutdown Module - Acquisition engine as explained hereafter,
> view the trace in the file called traceDebug.txt in the same directory.
To stop verbose mode :
> in the bin directory of the application, rename the file called debugMode.off into debugMode.on,
> restart the EATON Network Shutdown Module - Acquisition engine as explained hereafter.
4.5 Start and stop the Shutdown Module (advanced)
(Warning, if you stop, your computer is not protected anymore).
Windows:
From the Windows services panel you can start and stop the 2 services that are created:
z EATON Network Shutdown Module - Acquisition engine
z EATON Network Shutdown Module - Web server
Linux:
z In graphical mode, from your services panel you can start and stop the eaton-nsm
service that is created.
z In console mode, as root, you can also run the following commands:
/etc/init.d/eaton-nsm start
/etc/init.d/eaton-nsm stop
/etc/init.d/eaton-nsm restart
Mac OSX: z In console mode, as root, you can also run the following commands:
/System/Library/StartupItems/NetworkShutdownModule/NetworkShutdownModule start
/System/Library/StartupItems/NetworkShutdownModule/NetworkShutdownModule stop
/System/Library/StartupItems/NetworkShutdownModule/NetworkShutdownModule restart
To Next Page
Loading...