www.eaton.com
Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE Page 27/65
Remark:
If the shutdown timer on a client is the criterion that trips the shutdown procedure, automatic restart of
the client is not guaranteed (the case where AC power returns and only the client station is shut
down).
z Message broadcast to the administrator
A message is sent over the network to administrators connected to the server protected by Network
Shutdown Module.
Check following Windows pre-requisite
> Default value : activated
z Message broadcast to users
A message is sent over the network to users connected to the server protected by Network Shutdown
Module.
Check following Windows pre-requisite
> Default value : activated
z Access to Network Management Cards
If you customize the « Shutdown duration » on your computer, the update mechanism in UDP
broadcast mode for this value requires write access for the card. The « Manager login » and
« Password » are thus required.
To Next Page
Loading...