Eaton PowerXL DM1 Series - Page 107

97
Chapter 6 - Pump control application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 38. Multi-pump status (Cont.).
M7.3.2
Drive 2
ID 2232
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Disconnected;
1 = Fault;
2 = Pump lost;
3 = Need alternation; or
4 = No error.
Description:
Provides the network status of drive 2 while using the multi-pump mode.
M7.3.3
Drive 3
ID 2244
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Disconnected;
1 = Fault;
2 = Pump lost;
3 = Need alternation; or
4 = No error.
Description:
Provides the network status of drive 3 while using the multi-pump mode.
M7.3.4
Drive 4
ID 2256
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Disconnected;
1 = Fault;
2 = Pump lost;
3 = Need alternation; or
4 = No error.
Description:
Provides the network status of drive 4 while using the multi-pump mode.
M7.3.5
Drive 5
ID 2268
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Disconnected;
1 = Fault;
2 = Pump lost;
3 = Need alternation; or
4 = No error.
Description:
Provides the network status of drive 5 while using the multi-pump mode.
Table 39. Multi-pump measurement (*DM1 Pro) (Cont.).
M8.1 - Latest fault code (*DM1 Pro).
M8.1.1
Drive 1
ID 2221
Minimum value: Maximum value: Default value:
Description:
Provides the latest fault code of drive 1 while using the multi-pump mode.
M8.1.2
Drive 2
ID 2233
Minimum value: Maximum value: Default value:
Description:
Provides the latest fault code of drive 2 while using the multi-pump mode.
M8.1.3
Drive 3
ID 2245
Minimum value: Maximum value: Default value:
Description:
Provides the latest fault code of drive 3 while using the multi-pump mode.
M8.1.4
Drive 4
ID 2257
Minimum value: Maximum value: Default value:
Description:
Provides the latest fault code of drive 4 while using the multi-pump mode.
M8.1.5
Drive 5
ID 2269
Minimum value: Maximum value: Default value:
Description:
Provides the latest fault code of drive 5 while using the multi-pump mode.
.