Eaton PowerXL DM1 Series - Page 109

99
Chapter 6 - Pump control application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 39. Multi-pump measurement (*DM1 Pro) (Cont.).
M8.4.4
Drive 4
ID 2260
Minimum value:
A
Maximum value:
A
Default value:
A
Description:
Provides the motor current (Amps) of drive 4 while using the multi-pump mode.
M8.4.5
Drive 5
ID 2272
Minimum value:
A
Maximum value:
A
Default value:
A
Description:
Provides the motor current (Amps) of drive 5 while using the multi-pump mode.
M8.5 - Motor torque (*DM1 Pro).
M8.5.1
Drive 1
ID 2225
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor torque (%) of drive 1 while using the multi-pump mode.
M8.5.2
Drive 2
ID 2237
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor torque (%) of drive 2 while using the multi-pump mode.
M8.5.3
Drive 3
ID 2249
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor torque (%) of drive 3 while using the multi-pump mode.
M8.5.4
Drive 4
ID 2261
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor torque (%) of drive 4 while using the multi-pump mode.
M8.5.5
Drive 5
ID 2273
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor torque (%) of drive 5 while using the multi-pump mode.
M8.6 - Motor power (*DM1 Pro).
M8.6 .1
Drive 1
ID 2226
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor power (%) of drive 1 while using the multi-pump mode.
M8.6.2
Drive 2
ID 2238
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor power (%) of drive 2 while using the multi-pump mode.
M8.6.3
Drive 3
ID 2250
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor power (%) of drive 3 while using the multi-pump mode.
M8.6.4
Drive 4
ID 2262
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor power (%) of drive 4 while using the multi-pump mode.
M8.6.5
Drive 5
ID 2274
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Provides the motor power (%) of drive 5 while using the multi-pump mode.
M8.7 - Motor speed (*DM1 Pro).
M8.7.1
Drive 1
ID 2227
Minimum value:
rpm
Maximum value:
rpm
Default value:
rpm
Description:
Provides the motor speed (rpm) of drive 1 while using the multi-pump mode.