10 Industrial Ethernet Communication Adapter Modules (ECAM)
10.2 EtherCAT
108 PXR Electronic trip unit 01/21 MN012005EN www.eaton.com
10.2 EtherCAT
The PXR-ECAM-ECT is designed to connect with an electronic trip unit’s
internal communication module (PXR-RCAM-MRTU-I) Modbus-RTU link and
expand the communication capabilities into EtherCAT. The PXR-ECAM-ECT
is intended for use with PXR20 or PXR25 moulded case circuit breakers
(MCCB).
This section details the data and functions available for the Digital NZM with
PXR20 or PXR25 trip units via the PXR-ECAM-ECT register map.
Depending upon trip unit capabilities, a large number of features are
accessible through the registers as following described.
To Next Page
Loading...
