0 About this manual
0.4 Additional documents
8 PXR Electronic trip unit 01/21 MN012005EN www.eaton.com
0.4 Additional documents
For further information, please consult the following documentation and/or
software:
Title Type Address
IL012099ZU
“Frame size 2 circuit-breaker base unit”
Instruction leaflet
IL012100ZU
“Frame size 3 circuit-breaker base unit”
Instruction leaflet
IL012101ZU
“Frame size 4 circuit-breaker base unit”
Instruction leaflet
IL012102ZU
“Interface module for circuit breaker”
Instruction leaflet
IL012103ZU
“External communication link for circuit breaker”
Instruction leaflet
IL012104ZU
“Internal communication link for circuit breaker”
Instruction leaflet
IL012141ZU
“Shunt release, undervoltage release, relay module,
early-make auxiliary switch”
Instruction leaflet
IL012143ZU
“Shunt release, undervoltage release, relay module,
early-make auxiliary switch”
Instruction leaflet
IL019224E
“Connection cable for Modbus TCP and Profibus
communication modules”
Instruction leaflet
“Setting-Specific Representation of Tripping
Characteristics and Competent Assessment of their
Interaction”
White paper www.eaton.eu/ecm/groups/public/@pub/@europe/
@electrical/documents/content/pct_998455.pdf
“More safety when working
on live electrical circuits”
White paper
“Improved lifecycle management
thanks to digital circuit protection”
White paper
“xSpider”
(graphical design system for the planning of low-voltage
networks)
Software www.eaton.com/xspider
“Power Xpert Protection Manager” Software www.eaton.com/PXPM
To Next Page
Loading...
