This document outlines the recommended practices for assembling and installing the RE Series server enclosure. The standard server
enclosure is a high-quality design for storage of industry standard (EIA/ECA-310), 19” rack-mount hardware, which includes servers,
voice, data, networking, power protection equipment, KVM, etc., which are used in the data center rooms. 19" Standing Server Rack
is the ultimate solution designed and engineered for demanding data center environments. To achieve optimum versatility within the
server rack, users can set multiple depths throughout the rack by adjustable 19” mounting rails mounted on heavy duty side
supports. Horizontally divided side panels provide ease of access and convenient post-installation maintenance. Over 78%
perforations on front and rear door enable optimum airflow within the rack. Flat-pack option enables savings up to 60% in the
transport cost and warehouse space. Please follow the installation instructions closely; assembly should be performed using the
recommended tools.
Available RE Series Enclosures
Note: ● Above products can be shipped fully assembled or Flat packed
● Customized dimension also optional
Caution:
Before installing this product, please note the following safety information:
1. Always lower the leveling feet of the enclosure.
2. Always install equipment starting from the bottom of the enclosure to the top.
3. Always install the heaviest equipment in the bottom of the enclosure.
4. Always have at least two persons during assembling of the enclosure.
Attention:
Avant d’installer ce produit, veuillez noter les informations de sécurité suivantes :
1. Abaissez toujours les pieds de nivellement de l’enceinte.
2. Installez toujours l’équipement à partir du bas de l’enceinte vers le haut.
3. Installez toujours l’équipement le plus lourd au fond de l’enceinte.
4. Avoir toujours au moins deux personnes lors de l’assemblage de l’enceinte.
To Next Page
Loading...
Need help?
General
